Circuits are a way to automate different actions extensively and easily! You can make a circuit that opens a door when you say a secret code to it, or a circuit that follows anyone you want while yelling obscenities at them, or well, anything really! Before starting to code with circuits, you'll need a few things:

Necessary Items

Integrated Circuit

The integrated circuit is the foundation for all circuits. Your entire build will we based around this little guy. However, it can't work by itself.

First and foremost, it requires power, which you can provide to it via a Power Cell. Once you're sure that the power cell you're gonna use is charged, just Ordinary left-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not.

Ordinary left-click. It doesn't matter if is on or not.

use it on the integrated circuit. If you ever want to change the power cell or take it out for charging, you may take out by using a Screwdriver on it.

Ordinary left-click. It doesn't matter if is on or not.

Power cells drain whenever a component activates. By clicking the little i on a component you can see how much power each activation uses. If you don't know what I'm talking about, keep reading.

Once you have a powercell you may place your integrated circuit into a Shell.

Shell

The shell will make it possible for you to add components to the integrated circuit, it'll let you access the circuitry, and it'll add input options so that you can interface with your circuit.

Depending on the shell, you might need to use a Screwdriver on it to assemble it before you're able to Ordinary left-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not.

Ordinary left-click. It doesn't matter if is on or not.

use the Integrated Circuit on said shell to add it.

Ordinary left-click. It doesn't matter if is on or not.

If you ever want to remove the Integrated Circuit from it, just use a Screwdriver on it.

Different shells have varying size. Size represents how many components you're able to place inside a shell. There are four sizes:

Small: Allows up to 25 components
Medium: Allows up to 50 components
Large: Allows up to 100 components
Very large: Allows up to 500 components

There are many kinds of circuits, each with their special features: (If you're confused by what "output signals" or "entities" are, go down to Signal types)

Name	Description	Size	Required Research	Requires assembly
Compact Remote	The simplest handheld shell out there. Has one output signal that activates when you Ordinary left-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not. use it on your hand.	Small	None	No
Assembly	A shell you can attach to components such as signalers, proximity sensors, timers, valves, igniters, wires and more. To put it into attach mode, Ordinary right-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not. Right-Click it with a screwdriver.	Small	Advanced Shell Research	Yes and No
Bot	The simplest stationary shell. Has one output signal that activates when you Ordinary left-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not. use it.	Large	Advanced Shell Research	Yes
Controller	Another handheld shell like the Compact Remote, but unlike the Compact Remote this one has multiple buttons: Ordinary left-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not. Use it on your hand to activate the primary button (Known as "Signal" in the circuit), Alt-Ordinary left-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not.Click it on your hand to activate the alternative button, and Ordinary right-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not. Right click it on your hand to activate the extra button.	Medium	Advanced Shell Research	No
Dispenser	A stationary shell that is able to take and dispense items. Its outputs signals tell you what Items it has in it as a list, what was the last Item that was added, and two triggers for when an item is added and removed. To dispense an item click the plus button on the top right of the window, you'll see a "Vend" window pop up, from there you can choose what entity you want to dispense, and when you trigger "Vend Item" the item will be dispensed. To put items inside it just Ordinary left-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not.Click it with the item in your hand.	Large	Advanced Shell Research	Yes
Airlock	A circuit-controllable airlock. To insert an integrated circuit, Ordinary left-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not. Left click while on Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. . Has many input signals that let you open it, close it, bolt it, and unbolt it. Also has output signals that notify you when said actions are performed, plus two output numbers that return 1 or 0 if they're closed/bolted depending on the output.	Large	Advanced Shell Research	Yes
Gun	A handheld shell that's actually a GUN. Has infinite bullets, and returns both who shot the gun, what the bullet hit, and a trigger that triggers when the gun is shot.	Medium	Advanced Shell Research	No
Money Bot	Stationary like the Bot component, but allows taking and dispensing credits! Has output signals that tell you when money has been inserted, how much money has been inserted and how much money the machine has in general.	Large	Advanced Shell Research	Yes
Scanner Gate	Very simple shell that returns any entity that walks through it.	Large	Advanced Shell Research	Yes
Scanner	Another handheld shell. Ordinary left-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not. Use it on anything to output that thing as an entity.	Large	Advanced Shell Research	No
Brain-Computer Interface	Circuits, but in your BRAIN! For more information on Brain-Computer Interfaces (Also known as BCI), go here	Small	Brain-Computer Interfaces	Yes
Drone	This little guy is able to move around just like you! Has many signal inputs, with each representing each direction in which it can go.	Large	Movable Shell Research	Yes
Server	Basically the same as the Bot shell, but bigger and better	Very large	Server Technology Research	Yes

You can also add circuits to a few items and use them as shells. These are:

Name	Description	Size
Camera	Will let you take a picture by setting the target of the picture, the coordinates of where the picture will be taken, and the size of the picture.	Small
MOD Circuit Adapter module	A MOD suit module that lets you add circuits	Large
Synthesizer, Headphones and Spacepods	Let you choose an instrument, choose the sustain mode, insert a song via a string (each item of the string being a new line), play the song, stop the song, set how many times it should repeat, set the BPM, the volume, the volume dropoff threshold, the note shift, the note sustain value and the held note decay. It also lets you know if its currently playing, when it starts playing and when it stops playing. You could use this to make a synchronized band of sorts.

Once you have a shell with an integrated circuit in it, you may access the circuit in it by using a Multitool on it, and you may also begin to add Components to your circuit.

Components

Signal types

Every single thing in circuits revolves around these signal types. They send either information or triggers, which is the bases of circuits. There are 7 types of signals:

Signal: Think of these as a pulse of electricity or a shockwave. They are NOT binary, when you activate one a chain reaction begins throughout the rest. Can easily be turned into numbers but you should only do so for checking whether its 0 or not, since the value itself makes no sense.
Number: Any number your heart desires. Can also be used as a signal component, with any number above 0 activating a signal. You can also connect them to a string input.
String: Any ascii character. If you try to write numbers in this, they will not be classified as numbers, so you can't do arithmetic equations with them.
Entity: If you know DM, this is the equivalent to an atom. If you don't, then basically it can be any single item or living thing.
List: Any of the above data types, joined into a single element. There different kinds of lists, each corresponding to each of the datatypes mentioned above. You access said data types by indexing the list. You cannot make a list of lists, that's what tables are for.
- Associative lists: In a normal list, the index can only be represented by a number, so Index 1 would be the first item. In an associative list, you can set a string of text as the index. So you could make a list with two items: one who's index is "Name" and it value is "Matt", and another who's index is "Last name" and who's value is "Damon". So if you use the Index Associative List component with the index set as "Name", it'll return "Matt".
Table: A list of lists, usually used in databases such as the security arrests one. If a component provides a Table, you'll usually be able to see what each entry in said table is by clicking the information icon in the component.
Any: Usually used in inputs, signifies that it can take any of the signal types above.
Options: Changes what the component does, or what inputs it takes in. Can be changed with a string signal type.

Available Components

You might need to research specific things to unlock some of these components.

Name	Description
Access Checker	Takes as an input the numerical list gotten from the Read ID Access component. You can compare it with another numerical list via the "Required Access" input, or by a more legible access chooser menu via the card icon on the top right of the component. If you set the Check Any input to 1, or if in the access chooser UI you change "Access Required" to "One", it'll see if it has any of the accesses listed, instead of making sure that it has all of them.
Arithmetic	When triggered performs basic mathematical operations: Adding, substracting, multiplying, getting the minimum and getting the maximum.
Binary Conversion	Turns any number into a sequence of binary digits (which is a way of represent numbers with only two digits- 1 and 0). For example, the input "2" will output the following bits in the following order, from top to bottom: "01000000". Good for obfuscating information or for usage with AND, OR and XOR components.
Clock	When the input is any number above 0, it'll begin sending the output signal every 0.9 seconds.
Comparison	When triggered checks two of the inputs to see if they're equal, not equal, lesser than or bigger than the other. The Result output returns either 0 or 1 depending on if the comparison is true or not.
Concatenation	Combines up to four strings into one string.
Concatenate List	Turns a list into a string by adding a specified separator between the items. For example, we have a list that has two items, "Item1" and "Item2". If we set the separator as "," then we get "Item1,Item2". If we set the separator as " " (a space), we get "Item1 Item2".
Decimal Conversion	Converts a binary sequence into a decimal number. For example: The sequence of numbers "01000000" will return 2. Useful for translating stuff made with the Binary Conversion component back into a normal number.
Delay	When triggered, waits the specified amount of time in seconds, then triggers the output
Direction	When triggered, will output the direction towards the target entity from the point of view of the shell as either a string or a signal.
Filter List	Loops through each item on the list, and if the "Next Index" output signal connects to the "Accept Entry" input signal, then the value of that element of the list will be saved to the "Filtered List" output. The "Element" output string outputs the current element, "Index" outputs the index of said element, "Next Index" is triggered when it's time to check the next item in the list, "Filtered list" outputs the list with the filtered items, "On Finished" triggers when the component has gone through all the elements of the list and "On Failed" triggers when the component fails. Example: I have a list that has the following values: "Item","Item","Clown","Item". I want to remove the "Clown" value from the list while keeping the list format, so I use the Filter List component. I set my string as the "List Input" value, and I connect the "Element" output into a comparison component and I change the comparison option to "=", and I type "Item" into the second input. I connect the "Next Index" output into the "Compare" input, and the "True" output into the "Accept Entry" input, then I trigger the "Trigger" input in the Filter component. The component will then grab the first element in the list, it being the word "Item", then send the "Next Index" component, basically saying "I wanna go to the next item". Before it can move to the next item, however, whatever's connected to "Next Index" must finish, so the comparison input must do the comparison. We check whether if the element is "Item", and yes, it is. So we send a "True" signal, which connects to the "Accept Entry" signal input, which adds the Element into the final Filtered List, then goes to the next element, it being "Item" again, so the same thing will happen. When it gets to "Clown", the Comparison component will return False, and because there's nothing connected to the "False" output, the component ends there, which means that "Accept Entry" is never triggered, so "Clown" is not added to our final list. After all that we can check our output list, and we'll see that it's "Item", "Item", "Item".
For Each	Same as Filter List, but it does not output a list. Useful for checking if a value is in a list if you do not know at what index that value will be in.
Get Column	Gets the column of a table and returns it as a list.
GPS	When triggered, outputs the current position of the shell the Integrated Circuit is in
Health	When triggered, gets the health and damage amounts of the entity input.
Voice Activator	Triggers itself whenever it can hear a message, may this message be oral or through a radio. Returns information about said message and the speaker. If the message comes from a radio, you wont be able to get who said the original message.
ID Access reader	If the entity input is an ID Card, returns all accesses on that ID card as a list of numbers. To make sense of this list, use the Access Checker component.
ID Getter	Takes an entity input. If said entity input has an ID card, it'll output that ID card as the entity output.. The "Prioritize Hands" number input can either be a 0 or a 1 for false or true. If True, it'll check the ID the entity has in its hands first (if any) before checking anywhere else.
ID Info Reader	Takes an ID card as its entity input, and outputs all the info on said ID card.
Index	When triggered, indexes a list to get the value of an item in it. For example, let's say you have a list with the following items: Item1, Item2, Item3 and Item4. If you index the list by 1, you'll get "Item1" as the output.
Index Associative List	Indexes an associative list via the string index input.
Index Table	When triggered, indexes a table to get the list located in the index you set as the input.
Length	When triggered, gets the length of an input. If the input is a list or table, gets how many items it has. If it's a string, gets how many characters it has. If it's a number, retunrs 0.
Light	Emits light. The "On" input will make the light turn on if the number is anything above 0, and it'll turn off if it is 0.
List Literal	Basically, lets you create lists. Press the plus icon to add an item to the list, and the minus icon to remove the last one in the list. When triggered, joins the inputs into a list.
Associative List Literal	Lets you create associative lists. Press the plus icon to add an item to the list, and the minus icon to remove the last one in the list. When triggered, joins the inputs into an associative list.
Logic	When triggered, checks whether if: its inputs are all true (AND), one of its inputs is true (OR), ONLY one of its inputs is true (XOR)
Material Scanner	Takes any entity as its input and returns an associative list of the amount of each material that the entity input is made out of. They are indexed by the names of the material, so if you use it with an Index Associative List component and you, for example, set the index as "iron", it'll return how much iron is in the entity. For a list of materials, check the materials section of the Guide to Construction. Make sure the index is all lower case. And "Metal" is referred to as "Iron".
MMI	Let's you add an MMI to the Integrated Circuit. The "Message" and "Send Message" inputs let you send the MMI inside the shell a message that only it can hear. The outputs correspond to the keys in the player controlling the MMI's brain's keyboard: North is Up/W, East is Right/D, South is Down/S, West is Left/A, Attack is Left click and Secondary Attack is Right click.
Module	If you know programming, this is basically the equivalent of a function. If you don't know programmming, think of it as an integrated circuit inside an integrated circuit. Useful for making circuits look way less messy. You can duplicate these using the Module Duplicator.
Multiplexer	When triggered, checks to see if the number input is a number from 1 to 4, and if so, chooses the respective input of that number. For example, If I type "Test1" in the "Input 1" Input, and "Test2" in the "Input 2" Input, then change the value in the Input selector to 2, it'll return "Test2". It's as confusing as it sounds.
Not	If it receives anything other than 0, outputs 0. If it receives exactly 0, outputs 1.
NTNet Receiver	Recieves data sent through the NTNet network, if Tcomms is destroyed then tough luck.
NTNet Transmitter	Transmits any kind of data through the NTNet network, if Tcomms is destroyed then tough luck. Data can only be recieved by the NTNet Receiver.
Proximity Pinpointer	Returns the X, Y and Z co-ordinates of the entity input, but only if it's in view of the shell.
Pressure Sensor	When triggered, outputs the sensor of the exact tile in which the shell is at that time.
Printer	Prints a given string into a paper. It doesn't dispense the paper, and it triggers once the input string is received. Once it has been received you can get your paper by triggering the "Eject" input signal.waw
Radio	Sends and receives frequencies from radios or other radio components.
Random	When triggered, outputs a random number between the minimum and maximum numbers you set as inputs.
Reagents Scanner	Same thing as the Material Scanner, but for scanning the raegants inside beakers or other liquid containers.
Router	TBA
Select Query	For use with USB cables. Gets you the table that matches the column name and comparison input you provide it. For example: You connect it to the security arrests console, and from the arrests database you want to get the info of your friend, Mops-The-Floors. On the Input value, you connect the database output. On the Column Name you type "Name", and on the comparison input you type "Mops-The-Floors". It'll get you the table who's "Name" value matches "Mops-The-Floors". From there you can index it and get its arrest status, its crimes, etc.
Self	Returns the current shell as an entity.
Sound emitter	Emits a sound. You can choose what sound to emit from the options menu, and you can change both frequency and volume
Get species	When triggered, returns the species of the entity input as a string.
Speech	When triggered, says what you inputted in the string input out loud.
Split	Splits a string by its separator, turning it into a list. For example, you have a string that "Looks like this". By setting the string input to that string, and its separator to a space (" "), you'll get a list that "Looks", "like", "this"
String Contains	When triggered, checks whether the string you set in the "needle" input is in the string you set in the "haystack" input. For example, if you put "in" as the needle, and "You are in my room" as the haystack, it'll return true, since "in" is in the sentence "You are in my room".
Temperature Sensor	When triggered, returns the current temperature in the tile the shell currently is in.
Textcase	When triggered, makes it so that its string input is either all in lowercase or all in UPPERCASE.
Timepiece	Outputs the current station time. "Time Format" will output the time as XX:XX:XX, "Unit of Time" outputs time as specified in the "Unit of time" input. For example, if the station time is 00:10:08, and you set the unit of time input as "Minutes", then "Unit of Time"'s output will be "10".
To Number	When triggered, converts a string that's only numbers into a number signal.
To String	When triggered, converts its output into a string component. If it's output is an entity, it'll return the name of the entity. If the output is a list or table, it'll return "/list". For actually turning a list into a string, look at Concatenate List.
Trigonometry	A component that has many trigonometric functions. That's as in-depth as I'll go since I hate math with a passion.
Typecast	If the input value is the Signal type you set in the options, returns the input value. If not, returns nothing.
Typecheck	When triggered, returns what Signal type the inputted signal is.
Pathfinder	When triggered, will calculate a path towards the X and Y coordinates you set as inputs. Once calculated, will return a "step" (aka where it has to go next to continue said path). If triggered again when the shell arrived at the step, will output the next step, and so on and so forth. If used with the Direction component, can be used to make a Drone that moves by itself.
Pull	When triggered, will start pulling the entity input if its right besides it. Only works on Drone shells.

Machines and Items

Machines

Circuit Fabricator

Found on the Circuit Lab. Used for printing out Components, Integrated Circuits, Shells, USB-Cables, Circuit multitools and BCI Manipulation Chambers. If you Ordinary left-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not.

Ordinary left-click. It doesn't matter if is on or not.

Attack the component printer with an integrated circuit, then you'll be able to directly add components to that integrated circuit by just pressing the "+" button on the top-left of your screen. Just drag and drop the components into your circuit.

Module duplicator

Duplicates both Module components and Integrated Circuits. Just name them (open the circuit/module, and on the top left you should see a "Name" input field), then Ordinary left-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not.

Ordinary left-click. It doesn't matter if is on or not.

Attack the duplicator with either of those in your hand. After that click on the printer with an empty hand, and you'll be able to print the circuit/module.

Brain-Computer Interface Manipulation Chamber

Check here.

Items

Circuit Multitool

Let's you mark entities, which can later be uploaded to entity inputs by clicking the arrow pointing up when you have a circuit multitool in your hand. Can also be used to see circuits by double clicking them with it, but a normal Multitool should do fine.

USB Cables

Let's you connect a shell to a technological device. To do this, while you're grabbing the usb cable, click on the shell, then on the device you want to connect with. When you do this, you should get a new component on your shell. To disconnect, click the little "x" on the top right of the new component. You can only interface with a few select devices:

Name	Description	Inputs	Outputs
Lightswitch	Let's you turn the lights of the area on and off. That's it. Very simple. 0 is off, and any number above 0 is on.	On (Number)	Is On (Number)
Quantum Pad	Lets you set the target pad and notifies you when the teleportation failed.	Target Pad (Entity) Trigger (Signal)	On Fail (Signal)
Crew Monitoring Console	Lets you see the current health status of every crewmember that has turned on their suit sensors. Click on the little "i" button on the top right to see what values the table has. Use in conjunction with the "Select Query" component.	Trigger (Signal)	Crew Monitoring Data (Table) Triggered (Signal)
Bluespace Launchpad Console	Lets you set a Bluespace Launchpad's offset, and lets you trigger its sending and retrieving capabilities.	Launchpad ID (Number) X offset (Number) Y offset (Number) Send (Signal) Retrieve (Signal)	Sent (Signal) Retrieved (Signal) Fail reason (String) Failed (Signal)
Security Records Console	Lets you see the current legal status of every crewmember, and even let's you change them. Notable for having two components within it: Security Records Data (Which will return the entire security database) and Security Records Set Status, which let you set the status of the individual who's table you set as the input. If you want to, for example, set a person named John Doe to arrest, grab a Select Query component, set the input as the security records, the Column Name as "name" and the Comparison Input as "John Doe", it'll return John Doe's table, which you can then input into the Security Records Set Status component, set the option to "Arrest", then trigger it. Each Person has their on table, by setting the "Column Name" value to "name" and the "Comparison Input" value to "John Doe", you're basically saying "Get me the table of the person who's value in the name field is John Doe." To see what Column Names are available, click the little "i" icon on the top right of the Security Records Data component.	Security Records Data Trigger (Signal) Security Records Set Status Arrest options (Option) Arrest Incarcerated Paroled Discharged None Targets (Table) Trigger (Signal)	Security Records Data Security Records (Table) Failed (Signal) Triggered (Signal) Security Records Set Status Set Status (String) Failed (Signal) Triggered (Signal)
Teleporter Control Console	Lets you set, update and see the currently available teleporter targets.	New Target (String) Set Target (Signal) Update Targets (Signal)	Current Target (String) Possible Targets (List) Failed (Signal) Triggered (Signal)
Tram Controls	Let's you set the Tram's destination, and let's you send the tram to said destination. Also returns 1 or 0 if its travelling or not.	Destination (String) Send Tram (Signal)	Location (String) Travelling (Number)
Air Alarms	Lets you change the air alarm's min and max gas, pressure and temperature values. Also lets you check the current pressure, temperature, and amount of a certain gas in the area the alarm is in.	Air alarm options (Option) Pressure Temperature Every single gas type. No way in hell I'm writing them all. Min 2 (Number) Min 1 (Number) Max 1 (Number) Max 2 (Number)	Pressure (Number) Temperature (Number) Chosen Gas Amount (Number)
Binary Atmospheric Pump	Lets you set and get the pressure, lets you get the temperature, and lets you check whether if the pump is turned on or off and if it's active.	New Pressure (Number) Turn On (Signal) Turn Off (Signal) Request Port Data (Signal)	Input Pressure (Number) Output Pressure (Number) Input Temperature (Number) Output Temperature (Number) Active (Number) Turned On (Signal) Turned Off (SIgnal)
Digital Valves	Let's you know whether its open or not, and let's you open and close it yourself.	Open (Signal) Close (Signal)	Is Open (Number) Opened (Signal) Closed (Signal)
Hydroponics Tray	Let's you turn auto-grow on and off, and tells you the status of the plant, of auto grow, whether the plant was harvested and how much, whether the plant died, whether seeds have been planted, the water level, the toxins level, the pests level, the weeds level, the plant's health and the Reagents level.	Auto-Grow Setting (Number) Trigger (Signal)	Plant Status (Number) Auto-Grow Status (Number) Plant Harvested (Signal) Last Harvest Amount (Number) Plant Died (Signal) Seeds Planted (Signal) Water Level (Number) Toxins Level (Number) Pests Level (Number) Weeds Level (Number) Plant Health (Number) Reagents Level (Number
Conveyor Switch	Let's you turn the conveyor on or off, and let's you see what direction it's going.	Trigger (Signal)	Conveyor Direction (Number)

Brain-Computer Interfaces

Ever wanted to have a computer in your head? Sure hope the answer is yes, because Brain-Computer Interfaces (Henceforth referred to as "BCI's") are here for that! To get working with BCI's you need two things: A Brain-Computer Interface Shell (Info about which you can see above, in the Shells section) and a Brain-Computer Interface Manipulation Chamber, which is a machine. Both the shell and the machine circuit can be printed from the Component Printer.

How To Build

You build the Brain-Computer Interface Manipulation Chamber like any other machine, and you build the BCI shell by using a screwdriver on it, It already has an Integrated Circuit in it. It is recommended that you start coding when the BCI isn't on your brain yet, aka this exact moment. When the BCI is on your brain, you can no longer add components to it, you can still change connections and remove them though.

Components

BCI's are compatible with every single component, but it also has a bunch of exclusive components that only work with it. You can see these components on the "BCI Components" section of the Component Printer. These components are:

Name	Description	Inputs	Outputs
Bar Overlay	Shows a progress bar ontop of the entity object you set as its input.	Bar overlay options (Option) Vertical Horizontal Number (Number)	None
BCI Action	When the BCI shell is in your brain, shows a button in the top left of your screen. When you click on it, it triggers the Signal output. The icon input lets you change the icon.	Icon (Option) I am not listing them all, there are a lot Name (String)	Signal (Signal)
BCI Target Interceptor	When activated, the next time you click an entity, the output signal will be triggered and that entity will be set as the output.	Activate (Signal)	Triggered (Signal) Targeted Object (Entity)
Counter Overlay	Shows a three digit number on top of you. You can change the position of it by using the axis shift inputs, but it'll always follow you. You might even need to shift it since it doesn't show correctly when its on top of you for some reason.	Displayed Number (Number) Update Overlay (Signal) X-Axis Shift (Number) Y-Axis Shift (Number)	None
Object Overlay	Creates or deletes a sprite on top of the target entity. You can change what sprite it uses, and you can even shift its location by changing the axis shift options.	Object (Option) Corners (Blue/Red) Circle (Blue/Red) Small Corners (Blue/Red) Triangle (Blue/Red) Hud Mark (Blue/Red) Target (Entity) Create Overlay (Signal) Remove Overlay (Signal) X-Axis Shift (Number) Y-Axis Shift (Number)	None

How to put it in your head

Grab your BCI shell and just Ordinary left-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not.

Ordinary left-click. It doesn't matter if is on or not.

''use'' it on the BCI Manipulation Chamber. After that just open it up by, again, Ordinary left-click. It doesn't matter if Combat Mode Включить на 4, выключить на 1 или переключение на F по умолчанию. Щелчок левой кнопкой мыши по людям пустой рукой нанесет им вред если включён, или поможет если выключен. Не позволяет вам переключаться местами или толкаться при столкновении с людьми.. is on or not.using it and close the door once you're inside. Wait for a bit, and you should see an animation play out, once that animation is done, congrats! You're ready to do freaky brain stuff.

If you ever wanna remove a BCI Shell from your head, just walk back into a Manipulation Chamber and wait for a bit again. You'll see the animation play, and after its done you can just Right Click the manipulation chamber to get your shell back.

However, if all you want to do is recharge the power cell inside your BCI shell, you can just walk into a cyborg recharger.

Сборник полезных Руководств по игре
Начинающим	Не начинающим	Медикам	Инженерам	Исследователям	Безопасникам	Снабженцам и Сервису
Обязательное: Новичкам☑ Правила☑ Как избежать Бана☑ Полезное: Горячие клавиши Иконки HUD'а☑ Радиоканалы Механика Здоровья Выбор вакансии и распределение Что такое SS13? Термины SS13⚙ Случайные события Подсказки и Лайфхаки Часто задаваемые вопросы☑	Подробнее про Комбат-мод + Robust - (сделать одним) Самодельные приколы Руководство по взлому Незаконный Доступ Исследование космоса☑ Фауна Всё об игровых Расах Оссобености персонажа (Квирки)⚙ Настроение и Рассудок☑ Мини-игра Мафия ~~Оформление Документов~~ Искусство: Сохранение ваших книг и картин☑ Скульптуры Игра на Инструментах Рисование проводами	База Медицины⚙ Хирургия Всё про Органы Если Беды с Башкой Пособие по Травмам Вирусы Общая Химия Все Рецепты Создание Фабрики Сборка Гранат Подпольная Химия	Строительство⚙ типо Факторио Постройка Аванпоста для Шахты Машиностроение Цели Станции Энергетика СуперМатерия⚙ Солнечные Панели Газовая Турбина ~~Сингулярность~~ ~~Тесла~~ Атмосферика Токамак (HFR) Радиосвязь на станции	Наука и Исследования Дерево Технологий Робототехника⚙ MOD-костюмы Мехи Взрывотехника и Газы Ксенобиология⚙ Генетика Экспериментор Цитология Интегральные Микросхемы Модули ИИ ~~Технология телепортации~~ ~~Наниты~~	Хороший Коп Плохой Коп Руководство по Бою, Оружию и Броне Всё о Негодях и Тварях Противодействие Агрессорам ГУЛАГ ~~Космический Закон~~ ~~СРП~~ ~~Судебный процесс~~	Сервис: Готовка Еды Приготовление Напитков Ресторан Священик и его беды с башкой Ботаника: Гидропоника⚙ Путеводитель по Растениям Пчеловодство Карго: Ящики с припасами Как поднять Бабла Исследовательские Дроны Шахта: Мегафауна
Ещё больше гайдов можете найти тут. Внимание! В данный момент идет активный перевод официальной википедии /TG/station 13 на русский язык. ⚙ - статья в процессе перевода. ✎ - статья переведена, но в процессе правки. ☑ - статья полностью готова. ~~Зачеркнутый текст~~ - статья либо устарела, либо не предназначена для ЛРП

Guide to Circuits

Содержание

Necessary Items

Integrated Circuit

Shell

Components

Signal types

Available Components

Machines and Items