Участник:SpaceSmithers/guide sandbox

This page is currently under construction! The following page is currently in the process of being created, is undergoing a major structural rework and/or is being moved. The reason for this is: "This is a sandbox to make incremental edits to incorporate san7890's improved guide to mapping. Absolutely everything is subject to change, and I encourage you to overwrite literally anything. Editors note: standardize linking all headers to the respective HackMD headers so that readers absolutely can not miss it."

Other related guides: Understanding SS13 code, SS13 for experienced programmers, Guide to door access and Map Merger

Файл:Notice.png

Read this! This page is mostly port of san7890's A-Z Guide to Mapping, a HackMD document that details the mapping essentials. It is recommended that you read that document first as it is well organized, updated, and contains very useful visuals that this page may lack. If you are an experienced mapper, san7890's Mapping Reference Collection may be more useful to you.

Big Chungus говорит: "Nyehehehehe I'm Big Chungus (big chungus voice). I just went through some stuff and left some comments. If you want something nice to write about the Guide to Mapping (and the Mapping Reference Collection) in those above chat bubbles, I like Goonstation ZeWaka's Prompt (inspired probably by san7890's own words), which can be found here: https://hackmd.io/@goonstation/maps#Goonstation-Mapping-Guide ."

Getting Set Up

Setting up before doing anything is crucial to having a smooth and painless mapping experience.

Mapper's Checklist

Listed below is the software we'll be using:

• Git (Windows)
• Github Desktop (and a GitHub Account)
  • You may substitute this for any Git client that you know how to use already (Bash or GitKraken). If you do not know how to use any Git client, Github Desktop remains a perfectly acceptable client for mapping changes, and I will be using it throughout this guide.
• StrongDMM Map Editor (available for Windows, Linux, and MacOS)
  • If you prefer to use a web-based utility, you may use FastDMM2. Never, ever use Dream Maker to map. You will only harm yourself.
• Visual Studio Code with the Goonstation Extension Pack
  • This is recommended because you will need to test your mapping changes! In the words of MMMiracles (creator of Cere, Donut, and Tram): “Knowing how to code greatly expands your mapping horizons.” You will not need to know how to code in order to map but having this set up at the very start will greatly assist your future endeavors!
  • We use the Goonstation Extension Pack for easy interaction with BYOND’s Dream Maker code, it is a must-have. Don’t fret the name (because /tg/ coders made most of the stuff anyways haha).
• Python
  • This is needed for Git Hooks, which are important in your mapping endeavors.
• Love

It is imperative that you use the Map Merger tools before committing any changes to a map. See here for how. Some modern programs do similar functions to what Map Merger does, but running this and getting your Git Hooks set up save you a lot of headache.

Forking the Repository

Firstly, you need a fork. A fork will be your very own copy of our repository, free do with as you wish! Just hit the "Fork" button on https://github.com/tgstation/tgstation. Feel free to be creative with the name of your fork. Displayed should be "(GitHub username)/(name of fork), forked from tgstation/tgstation",It should look something like this: .

Within your fork, you'll want to click the "Code" button, then click "Open with GitHub Desktop" (assuming you've downloaded it) under the dropdown. A prompt from the application will open; find a clean folder to locally copy your repository and click Clone. This may take a few minutes. Another prompt will appear asking: "How are you planning to use this fork?" You will want to select "To contribute to the parent project". This will make creating Pull Requests easier.

Branching the Fork

GitHub Desktop should look something like this

The final part to setting up GitHub is to make a new branch. This part is super-duper important, because you want to keep your “master” branch on your fork as clean as possible, since it’s a pain to clean out and send pull requests to.
To do this, click on the Current branch (which defaults to "master") and click on the "New branch" button next to the filter bar. For every individual project you work on and submit a Pull Request for, you want to be on a brand new branch. Feel free to name it whatever you want, can be as goofy or as organizational as you want. It’s your fork, after all.

You may also get a screen that says “base it off the current branch” or “base it off the upstream/master”. That depends on what you want, but if you want to start fresh on a new project, always hit “base it off the upstream/master”.

Mapping: San7890's Guide to StrongDMM

Preamble

In the time of Metacide, the creator of MetaStation and the last person to make a "Guide to Mapping", all that you had was Dream Maker's program. Dream Maker sucks though, and we have better tools. While all of the content you see on the rest of this page and elsewhere may be lifted straight from DreamMaker, this will serve as a small "pointer" to where you can find that same functionality in StrongDMM. Everything you can do in Dream Maker, you can do about 100 times better in StrongDMM. If you've managed to grasp the bare essentials of even playing Space Station 13, then I have no doubt that getting acclimated to StrongDMM will probably be a walk-in-the-park. However, BYOND hasn't changed in how it parses maps, so that will all hold steadfast and true.

At the time of me writing this guide, StrongDMM is currently in an “alpha state” (Versions 2.0.0 and up). I will be using the alpha version since it’s the path the program is going to take in the future, but if you’re hesitant about an alpha version, feel free to downgrade to Version 1.9.1 (it has a few features 2.0.0 is missing). You can actually run both concurrently, too! Regardless, let’s start mapping!

Starting StrongDMM

Go into "File" in the top-right of your screen and hit “Open Environment”. The “environment” is how StrongDMM is able to find, collect, and parse the atoms that make up every part of every map. This is an important step, and make sure you always use the .DME (Dream Maker Environment) file on your repository to keep things as straightforward as possible. Just get tgstation.dme.

Your map in StrongDMM

Then, go back into "File" and hit "Open Map". You'll want to go into the ``_maps`` directory of your repository, and then find any map you like. I'll be using MetaStation.dmm for the purposes of this guide. Once StrongDMM loads the map of your choosing, you can use Middle-Click and the Scroll Wheel to find your way around. Soon, you should get something that looks like this:

Layers and their keybinds to toggle them

Beautiful! Let’s talk about those colors. Those are areas which are important for the game to understand what discrete location is what, and we use it for several things code-side. For example, the bridge is a different area than the bar, so you want to make sure everything is defined appropriately. They tend to be a bit distracting through, so you can hit Ctrl+1 to get rid of those. Do make sure you define them properly when you’re done, though.

Areas are one of four different, distinct “layers” we use in BYOND. The other three are turfs, objs (for Objects), and mob (for creatures/animals/what-have-you). Their progenitor species is the atom. You can go into the options tab or hit the respective keybind to quickly filter for those.

---

Editing

These are your tools to edit with. From left to right, they are: Add (1) Fill (2) Grab (3) Pick (Hold S) Delete (Hold D) Replace (Hold R) They each do their own thing, and you can hover over them in the program to see what you might want to use. Feel free to get a feel with the tools by toying around with stuff, and eventually getting to work on your own maps as you desire.

Testing Your Map

The “Open in Visual Studio Code” button. Click the image to expand.

You should always test your code, test your maps, test your sprites, test everything whenever it’s a non-trivial amount of work. There’s an incredibly simple way to do this, which I’ll reveal to you now:

The easiest/fastest way to do this is to go into Github Desktop and find the button that reads “Open in Visual Studio Code”. If it doesn’t, set your default editor to Visual Studio Code.

Once inside Visual Studio Code, you'll want to hit Ctrl+F5, or just F5. This will start compiling your code, which shouldn’t take more than a few minutes. Once done, it’ll boot up BYOND’s Dream Seeker, connect you to the local server, and automatically give you the highest permissions. This is because you’re doing everything in the debugging mode, which is quite nifty. This is arguably the simplest way to do it.

Once Space Station 13 has started, the Server tab located in the Stat-Panel will be a big help. From there, you can change maps and also skip the post-initialization wait time by clicking Start Now (or just type Start-Now in the command bar). Observe as a ghost and view your changes. Compiling is a good way to view the more subtle nuances that you weren’t able to pick up on through the editor. This includes (but is certainly not limited to): lighting, door accesses, mob interactions, and just figuring out if it looks good.

---

Simply follow these steps and you should be able to catch most errors mapping brings. The Pre-Commit Checklist, also provided in a dropdown below, best applies to outright Station Mapping and may not be applicable to ruins/away missions/shuttles/etc., but it’s still quite good to check as much as you can rather than assume that it works.

Click to expand Map Testing ChecklistClick to retract Map Testing Checklist

• Are floors with or without air, as they should be? (regular or airless)
  • You can test this one out by looking for Active Turfs.
• Does the area have an APC?
• Does the area have an Air Alarm?
• Does the area have a Request Console?
  • Not every area needs this, look at other stations.
• Does the area have lights?
  • When you compile your map for testing, make sure the lighting is adequate. You don’t want any unwarranted “dark” spots in your rooms. If you’re going for “warm” or “cold” lighting, make sure it all matches.
• Does the area have a light switch?
  • Only smaller rooms that get minimal traffic should recieve lightswitches. Areas like primary hallways should definitely not have them.
• Does the area have enough security cameras? (Use the Debug Verbs for help)
• Does the area have enough security cameras? (Use the verbs under Mapping for help)
• Does the area have enough intercoms? (The verb Intercom Range Display in the Mapping Debug Verbs helps with this.)
• Is the area connected to the vent air loop (distro)?
• Is the area connected to the scrubber air loop (waste)?
• Is everything wired properly?
• Does the area have a fire alarm and firelocks?
  • Typically, doors leading into maintenance do not need firelocks. Do not place firelocks on doors facing the exterior of the station (like space or the planet).
• Do all airlocks work properly?
• Are accesses set properly on doors, buttons, etc.?
  • For typical airlocks, you can use the Airlock Mapping Helpers. Otherwise, consult the reference for Door Accesses.

SpaceSmithers говорит: "I'm working on an Access Helper table which might help for this part. Also, I copied the checklist into a nifty dropdown seen above in the hackmd port."

Big Chungus говорит: "san7890 went through and documented all of the access helper define macros here: https://github.com/tgstation/tgstation/blob/master/code/__DEFINES/access.dm don't know how much that helps."

SpaceSmithers говорит: "Looks good. A much needed update, I think. Side note: Keycard Auth grants auto-connect ability on Holopads. Smithers' Niche Funfact #113."

• Are all items placed properly?
  • In summary, are your objects all on tables as needed? Are tables or other objects obscuring your vents/scrubbers?
• Does the disposal system work properly from all the disposal units in this room as well as the pipes of which pass through this room?
  • Just throw yourself through a few disposals systems that seem to pass through the area you touched. Easy to forget.
• Check for any misplaced or stacked piece of pipe.
  • /tg/station also lints for this to catch you if you forget.
• Check for any misplaced or stacked piece of wire.
  • /tg/station also lints for this to catch you if you forget.
• Identify how hard it is to break into the area and where the weak points are and balance the area accordingly.
  • For example, the Vault should be made of reinforced structures and electrified windows, the Kitchen should not. Be reasonable, not everything has to be an overly-secure structure to prevent the “tide” or other events. You will be vetted on this, just make your best choice.
• Check if the area has too much empty space.
  • You don’t want vast, bald spots in your rooms that serve little purpose. Fill it up with stuff if you can, or just trim the fat entirely. Whatever works best for the station and your design.
• Are there any indestructible turfs where they shouldn't be?

• In the Stat-Panel (mentioned previously), go into the Debug Tab. Now, select the Mapping Verbs - Enable verb.
• You should now have the Mapping Tab.
• Check for errors for cameras, power cables, and atmos pipes.
• Powersink the station and ghost around to check for unconnected powernets (APCs that aren’t discharging/charging).
• Ride disposals from start to finish to check for broken disposals.
• Make yourself an AI and check for blindspots in camera networks. You can also use the Camera Range Display Verb.
• Spawn yourself in (check Debugging Hottips)

Fix your errors, and run through this list again to double check, because chances are you missed something or you broke something else. That’s just how it is. Doing so will save everyone a lot of headaches down the line. Specifically, yours, because you will have to fix your own shit.

---

In mapping, there are a lot of errors that may come up during Initialization of the world. However, we do check for a lot of these errors. Here’s how you can check these out and get them ironed out before we have to catch it for you.

Assuming your world is already compiled, wait for Initialization to finish, and then type in this verb into your chat box Get-Current-Logs. You should see a pop-up with a whole list of logs. You just want to go down this list and select the option that says map_errors.log. Go ahead and either “View” or “Download” this log file (“Open” doesn’t typically work for me).

We also now do this check for you on every pull request for station maps through our GitHub Continuous Integration process. I would advise checking this for non-station maps, though.

Committing and Pulling

Return to GitHub and you'll see your modifications to the Map Keys in the line changes. In the bottom-left corner, you'll see the commit menu. Maintainers at /tg/ really do appreciate if you write out a thoughtful commit title and description, because you will need to justify your changes in one way or another when you submit it for review through the Pull Request Process!

Committing your changes

An example of a good commit title and message.

Once you've written the constructive title and brief description, hit "Commit to (your branch name here)”. If it says “Commit to Master/Main”, don’t hit that button because you’ll dirty the master branch of your forked repository. Make a new branch, and base it off what you’re currently on. If it doesn’t say that, everything’s just fine. Congratulations, you’ve “committed” your changes!

What if you didn’t like that, realize you made a typo, or just wanna go back? You can always just go back into StrongDMM to edit your map and make a new commit, but you can also go to the History tab, right-click on your commit, and click "Undo commit...", which will just undo your commit, and then you can make as many changes as you please, then recommit. This is one of the greatest advantages of Git, it has a powerful versioning system that you can easily use to hop from one day’s work to another.

If you’re happy, then seek out a "Publish branch" button. This will upload your branch to the remote (github.com).

Creating a Pull Request

Once all the "deltas are resolved" and what-not, a "Create Pull Request" button should appear on GitHub Desktop. Click that, and your web browser will open to GitHub. Ta-da, just fill in the template just like the descriptions in the contributing template say (including an image or two of your changes is always well appreciated), hit “Create Pull Request”, and wait for the feedback to roll through. I would advise viewing some example PRs, open up a few of them (if you haven’t already been tracking how people write Pull Requests) and try to learn well.

The /tg/ guidelines for Pull Requests can be found here. Another document with friendly advice from a coder can be found here.

---

You’ve done it! You’ve done mapping! I hope that wasn’t too painful, and the rest of this page (or the links below) will introduce you to some deeper contents that I briefly touched on in regards to mapping.

Closing Notes

While this guide is meant to contain the bare-bones of information to get people started on mapping, the Mapping Reference Collection will contain a wealth of information for mappers. I heavily recommend reading this.

Stumped? Feel free to ask some more experienced mappers any questions on the /tg/ forums or the Discord

End of san7890 guide port, now entering old Metacide guide territory

SpaceSmithers говорит: "Need to find a good way to transition from StrongDMM to Meta's Dream Maker sections. Edit: I might just overwrite and renew all of Meta's stuff actually. I'll include a hyperlink at the top of the page that will take the user to an older version of the page with Dream Maker instructions."

SpaceSmithers говорит: "(9/8) Double-check for missing hyperlinks. Does it need more images?"

---

SpaceSmithers говорит: "(8/11) Regarding the articles below this bubble: I've slain a bunch of content that was crossed out and deemed totally useless. You can always check out an earlier revision to review the old info. The sections I did keep, however, I thought might have at least some merit. I will pick some out and refine them and/or add my comments, refining and incorporating them at the end. I also removed the pre-commit checklist as it was already listed above, let me know if you want that back down here in this section. Might even make it a template?"

The first step, then, is to be able to create your first few rooms. Select an open turf from the generic simulated floors, preferably /turf/open/iron. Each floor has a preset make-up of air on them, unless you use one titled "airless". Surround these floors with walls, and hey presto you have a room. Try sticking some tables in there, perhaps a vending machine or two.

If you want to add some chips to your new den but are unhappy with how they neatly stack on top of each other, you can adjust their "pixel_x" and "pixel_y" values with the Nudge and Dir menu. You can click & drag the values, use the mouse wheel on them, or double-click on them to enter exact values.

The Prefab and Instance menus.

Changes by Nudging or in Direction (dir) are reflected in the Prefab and Instance menus. All modified values are green so it's easier to identify them. Un-modified variables may be hidden, in which you'll need to uncheck "Show modified only" by clicking on the gear icon. Most wall-mounted machines on stations are shifted like this, and while they APPEAR to be on a wall, they are actually on the tile in front of it. Luckily, most wall mounts come with convenient directional subtypes in the object selector so you don't have to manually nudge them. Just don't go overboard with this, as every new instance of an object is added as its own entry in the menu, and when there are dozens of them it can get hard to remember which one you wanted(still relevant? I guess it clogs the prefab menu.). Once you've made your room you'll want to put lights in.

There is one uninvited guest here!

Important: While building your station you might find yourself in need of an object with a specific alignment (windows, pipes, cables etc) that does not appear in your menu. This is because BYOND does not simulate instances of an object other than its base state unless they are present on the map. You can generate them by right clicking an object and selecting "generate instance from state/direction". This function has an unwanted feature in which a generated object sometimes has a tag added automatically. These tags can cause error with certain features of the game during a round, and need to be removed. To check for it, right click an item on the map or in the menu, select "edit" and scroll to the "tag" line, which should be empty save for two doublequotes (""). If it's not (which is easy to tell since the tag is massive and bold, impossible to miss even scrolling at lightspeed), change it. Well maintained maps don't usually contain these, so you should be safe to copy-paste to your heart's content. As a tip, remember that all non-standard objects have their own entry in the menu, and having a tag is not standard at all for most object!   Big Chungus говорит: "I think this is just a really shitty way of explaining what a pre-fabrication is. It's functionable in how it mentions how you can have "rogue" prefabs, but it's full of BYOND specific instructions and it's just not really useful. It's serviceable, but definitely dated and hard to comprehend unless you know what it's trying to get at (I feel). I'll look at adding a better explanation to the Mapping Reference Collection sometime. Also, those pipes are WAY outdated (picture at left). Definitely needs to go. *chomps on carrot*"   SpaceSmithers говорит: "Sounds good. I'll see to getting a replacement image. EDIT: (9/7) I've replaced the image. I'll leave it to you to describe "rogue prefabs". Everything not regarding that can be removed."

So now we get to the basics of making a functioning room. First of all, you'll need to re-enable the area layer. Pick some area from the object tree, and cover your room in it. You can rename this area if you want, (Really? We can manually edit the names of areas?)we'll do that later. Make sure the area isn't used anywhere else on the map. Each area should have one APC (Area Power Controller) in it. When creating an APC, the "auto_name" subtype will automatically name the APC to the area that it is in. Or, you can use the generic parent type and manually set its name variable. Other subtypes of APCs may include "unlocked" and "highcap". For testing, you might want to use a "highcap" variant that stores more energy, since we don't have a power source yet. Alternatively, you can change the "cell_type" variable to /obj/item/stock_parts/cell/infinite for infinite power (Source: i made it up. Double-check this, Smithers!). If there are no directional types for the APC you're using, you can use the Nudge and Dir menu from earlier to adjust it. In a normal power system, you'd connect the APC up to all the others and the station's generator via SMES cells, but we'll do that later. For now you have a basic room that is powered and starts with enough air to breathe happily. You can put an air canister in if you think you'll consume all the oxygen, or somesuch.

Файл:Directions.png

Important Note: There are nudge_x and nudge_y variables in the editor, as well as various z-axis variables. Don't ever change these, they're not used in SS13 and break things.(is this possible in strongDMM? nudge_x/y are displayed bottom right when selecting and obj anyhow..)

To be able to actually spawn into a room, you'll want to place spawners. You'll see these as the big red X symbols on the default map, for each role. There are also blue Xs for xeno spawn locations (pretty sure spawners now use fancy sprites for their respective spawns) and the spawns for all latecomers on the arrival shuttle.(old/irrelevant, shuttles are not placed onto station maps anymore.) Stick in a spawn_late somewhere in your room for now.

(may change for redundancy reasons) To actually test your map and be able to screw around in it as an admin, you'll have to compile it. The easiest way to do this is through Github Desktop, where you will open the repository in your external editor by clicking the "Open in Visual Studio Code" button. If this is not present, change your default editor in the options to Visual Studio Code. In Visual Studio Code, press F5 to both compile and launch the game. Full permissions are automatically granted as "localhost".

The best possible training is through experience. From here on out, you can make whatever you like, really. Copying the default map and working out how everything works isn't too hard and is fairly rewarding. You could just tweak the default one if you like. The first thing I made was a small shuttle - you can see this at the bottom. Just tweak and add stuff and you'll work out how almost everything works fairly easily. Poke around with both Github Desktop and StrongDMM. For explanations of wiring, piping, and atmos, ask away on the mapping channel of our discord or on the forums.

Файл:Jorji Costava.jpg

san7890 (in a comment, uncommented by smithers) говорит: "About 90% of the stuff from this point onwards is outdated. I rewrote everything from this point in another HackMD (https://hackmd.io/@tgstation/ry4-gbKH5#Pre-Commit-Checklist) onwards. I need someone to explain how shuttles work to me (again) before I'm 100% done with that though, but I've struck through everything ported over (or that I don't really see why it should be ported over)."

SpaceSmithers говорит: "Already wiped the other 90%, except for the atmos part. Throwing the idea out there that maybe we could put atmospherics mapping into a dedicated subpage. Not a strong opinion, just an available option."

Gas tanks and filters

Each station should have a full set of these - or at the bare minimum, one for N2, one for O2 and a third tank to filter dangerous gases into.

Файл:Atmos mapping.jpg

Left to right: N2, O2, Airmix. The canisters inside are just for decoration.

Each gas tank needs:

• Outside: A tank computer and a gas filter to pick what gases will be filtered into it.
• Inside: A gas injector (input), a vent pump (output), a gas sensor and a specific turf.

The tank computer controls the input/output and receives data from the gas sensor.

The specific turf creates the gases that will be inside each tank - the gas canister is just for decoration.

Let's take a look at the MetaStation N2 tank:

• Tank computer: /obj/machinery/computer/atmos_control/tank/nitrogen_tank
• N2 filter: /obj/machinery/atmospherics/components/trinary/filter/atmos/n2
• Gas injector: /obj/machinery/atmospherics/components/unary/outlet_injector/atmos/nitrogen_input
• Vent pump: /obj/machinery/atmospherics/components/unary/vent_pump/siphon/atmos/nitrogen_output
• Gas sensor: /obj/machinery/air_sensor/atmos/nitrogen_tank
• Turf: /turf/open/floor/engine/n2

These objects have all the neccessary vars preset and start switched on - you'll only have to edit the dir if neccessary.

Additionally, you'll want this type of gas mixer for the airmix tank (N2 + O2):

• Air mixer: /obj/machinery/atmospherics/components/trinary/mixer/airmix

Shuttles

SpaceSmithers говорит: "IMPORTANT: I don't want a repeat of the old guide; this is not the place to dump random shuttle code documentation. This is a mapping guide. If you want to document shuttle code, you're goddamn crazy comment it in the code itself or make a dedicated page."

There are two types of shuttle docks:

• stationary == places where the shuttle can dock
• mobile == placed on shuttles

Mobile ports will dock directly on top of stationary ports.

Stationary Ports

For arrivals and departures, we will have to add a /obj/docking_port/stationary for each, and manually edit in some variables for them to work. It's a good idea to have another map open in your workspace to study and cross-reference from.

Before we do anything, lets identify some of the variables we'll likely be using.

• dir: The direction of the port.
  • If a shuttle's mobile docking port direction is different than the stationary docking port's direction, the shuttle and all items on it will be rotated accordingly.
  • Other variables, like width and height, are relative to this direction. This means that on a docking port facing west or east (dir = 4 or 8 respectively), height will be horizontal on the mapping workspace, and width will be vertical.
• height: The size of covered area, parallel to dir.
• width: The size of covered area, perpendicular to dir.

TODO: confirm that the following information about dwidth and dheight are accurate. also reword it; kinda wordy and not easy to understand.

• dheight: Largest amount of tiles in the height between the edge and the docking port. The tile containing the docking port does not count.
• dheight: Largest amount of tiles in the width between the edge and the docking port. The tile containing the docking port does not count.
• name: A name string for the port. This name will be visible on shuttle consoles and the Shuttle-Manipulator admin verb.
• shuttle_id (formerly id): Identification variable. Mandatory for certain ports.
  • IMPORTANT: You MUST use these exact strings for the listed areas, or else they will not function. Stub? double-check all instances of shuttle_id in case i missed some.
    • Arrivals dock: "arrival_stationary"
    • On-station dock for centcom ferry: "ferry_home"
    • Emergency Shuttle Dock: "emergency_home"
    • Cargo Dock: "cargo_home"
    • On-station Whiteship dock: "whiteship_home"
    • Auxiliary Base Construction: "aux_base_zone"
  • Docks with the _home suffix have an _away counterpart at Central Command.

Metastation's Arrival Dock. (PLACEHOLDER (PROBABLY))

Lets take a look at Metastation's arrivals dock. (yadda yadda rotated, note the relative width. specify each var with its abbreviation in parentheses because im an idiot and didnt write the whole var in.)

The labor shuttle, mining shuttle, public mining shuttle, and the auxiliary base zone each have their own, unique subtype.

You need to add the dock types to the map and edit the bounding boxes via varediting the dock, you need to varedit height, width, dheight and dwidth at minimum. These are offset by the dir so do keep that in mind, eg if dir == 2 then width goes from EAST to WEST, if dir == 4 then width goes from NORTH to SOUTH and dwidth/dheight are offsets from the lower-left corner of the plane switched to the dock's dir

You should also ensure the directions face the shuttle or face away from the thing the shuttle docks with.

Warning the bounding box for the mobile dock must fit inside of the stationary dock (after any rotation) Or the shuttle will refuse to move.

If the shuttle's mobile docking port is in an area that is a subtype of /area/shuttle, Only turfs in the bounding box in that same area are moved. Otherwise it moves all turfs in the bounding box. This can be used for odd shaped shuttles. (the area will be transfer over as well)

Also note that the emergency shuttle and cargo shuttle need special subtypes of the dock type eg so /obj/docking_port/mobile/emergency

The other variables of note is traveldir, which defines if the shuttle rotates on transit, it's an angle in degrees (just imagine the shuttle is inside a circle . For example, if you want the shuttle going right to left set it to 270 degrees.

Dwidth and Dheight in more depth

dwidth/dheight is the offset of the docking_port obj from the (0,0) bounding box corner. In dir == 1 (north) 0,0 is the bottom left corner? This changes for each direction, For example when dir is 2 it's the upper right corner. so dwidth and dheight identify where the bounding box starts relative to the docking port obj whereaswidth and height determine the actual width and height of the bounding box

Note: We count step 0 as a tile, so a height and width of 9 is actually 10 tiles (tile 0 to tile 9)

Here is an example for the north facing shuttle dock direction - you can rotate this image to determine where the offset is for each other cardinal direction Файл:ShuttleBox.png

Other files

If you are adding a map to the game, you need to ensure it has a JSON file under _maps, and is included in the maps config file.

Файл:Jorji Costava.jpg

san7890 (in a comment, uncommented by smithers) говорит: "I'm going to keep it 100% with you, I don't even know why we have this section. I didn't bother adding it to the modern guides because I don't even know the usecase of it... feel free to leave it here if you want, but I don't know of a usecase."

SpaceSmithers говорит: "Beats me. I'll get a second (third?) mapper's opinion on the matter."

Multi-Z

SpaceSmithers говорит: "Mapping Reference Guide has a nifty section on Multi-Z. Keeping this here temporarily(?) to check if this contains any unique information."

Multi-Z is a feature which allows a station map to have multiple Z-levels layered on top of each other, behaving as a single station with multiple floors. This feature is currently in use on the Tramstation and IceboxStation maps. A station's multiple levels can be bundled into one map file, or in several seperate files. The traits section of the map configuration json tells SS13 how to link the maps together.

• If you are building station rooms on a lower Z level, ensure that a floor of some type is mapped on the Z level above the room. You can check the coordinates in the mapping editor to ensure you floor over the correct dimensions of the room. When running the server in Dream Daemon to test the map, you can go to the Debug tab and hit show debug verbs, go to Mapping tab and hit Show ATs, if the list is empty, you are good.

• Earlier versions of multi-z did not require a baseturf to be defined under each z-level's traits in the config json. Each level must now have a baseturf set.

• The maploader will not load and link a map file without areas or turfs defined. An empty space (nothing but baseturf) map will runtime. If you are adding a Z-level to an existing map, be aware of this.

• SS13 will cache a map's configuration json file in data\next_map.json. If you alter a map's configuration json locally, you must also clear this file by using the change-map verb in game, deleting the file, or replacing it with your updated json file.