Редактирование: TGMC:Chief Engineer (раздел)

===APC===
First, determine how the APC was damaged. If it's wires are simply cut (such as from a xeno swipe), simply use the wire cutters and mend every wire and replace the panel *with a screwdriver. If it was totally destroyed, move onto the next step.
*If it was destroyed, remove the cover with a crowbar or whack it off with something, like a knife.
*Remove the power cell with an empty hand.
*Screwdriver the board loose.
*Crowbar the board out (boards from destroyed APCs crumble when removed, necessitating a replacement).
*Use wirecutters to remove the power terminal, you will receive 5 cable coil from this.
*The power terminal 'must' be exposed first, crowbar up the floor tile in front of the APC if it's not
*Use a blowtorch to weld the frame off the wall, you will gain 1 metal sheet from this.
*Construct a new APC frame from two sheets of metal.
*Pick-up the frame and attach it to the wall.
*Install a power control module.
*Screwdriver the board in place.
*Install 5 cable coil into the APC.
*Slot in a power cell.
*Crowbar the cover shot.
*Swipe the APC with an appropriate ID card and access the interface.
*Enable the breaker.
*(Optional) Lock the interface with the ID.