Редактирование: Guide to the Hypertorus Fusion Reactor (раздел)

=== Foreword: Usage on non-Delta stations ===

This uses Delta Station as a template, since the abundance of space makes the layout much clearer to follow. Much the same is possible on MetaStation, but you need to be a bit more creative with finding space:

* The top left corner in the bottom right area makes a useful spot for Electrolysis.
* The filter loop can do a 180 and double back on a different piping layer along the bottom part of the filter loop, which allows for two filters for H2O to Electrolysis and Pluoxium at the left, three filters for your choice in the next block, then six filters for the key Freon Loopback, BZ, Healium, and PN extraction, and Trit/H2 routing.
* The mixing chamber can be used for Metal Hydrogen production. Disconnect the usual unfiltered gases to chamber. Break the plasmaglass with a fireaxe, add a Holobarrier, and construct a full Airlock to prevent thermal leakage. Adding in a Passive Vent to the middle follows the same pattern as on Delta.
* It's probably best to skip BZ formation and Freon formation, since the time taken to construct regions gets just bad enough for the payoff that it's better to just run the HFR at stable levels for longer. There's enough room in the Atmospherics Foyer if you have multiple people, or if you just want to try anyway. Freon formation can use a T2+ canister instead of a spread pipe network. Be careful to still leave room for extended main intake cooling, in case you get called upon to do things that aren't playing with gases.
* Having high tier freezers becomes much more important, since you don't have much space for expansive Freezer arrays near the HFR room. Separating waste processing and waste heat transfer is going to be very difficult, and it may be best to just leave Freezers attached directly, and switch each one off once overloading.
* If you're just after Nitrium, most of the infrastructure can be skipped.