Редактирование: Guide to Research and Development (раздел)

===BZ Gas Shells===
'''The robust way'''[[File:BZ Experiment Guide.png|thumb|Quick guide to BZ Gas]]
''Also see: [[Guide to Ordnance]]''

This experiment is also performed in Toxins. Producing BZ requires you to mix Plasma and Nitrous Oxide (N2O) and cool the mix down. This is usually performed in the Ordnance Lab's Freezer Chamber.

Note that you must both open the valve and turn on the injector via Ordnance Chamber Control. 

Be sure to create a bottleneck (either by limiting the injection or by not maxing out one of the gas mixers' pressure), as BZ forms faster in low pressure.

In order to actually cool the gas, you will need to set up a cooling circuit. One is already in place, you may complete it by attaching a canister with a gas, such as nitrogen (which will make it easier to do Reactionless Explosives as you will already have cold nitrogen, which you can remove from the circuit when needed), or carbon dioxide. Remember to turn on the thermomachine and set it to the lowest temperature.

Once the BZ is formed, you may extract it by wrenching an empty canister into the output port and setting the air alarm to scrub BZ (and only BZ) in an expanded radius. Don't forget to turn it on.

'''The unrobust way'''

Alternatively, you can ignore everything said above and just order a canister of BZ from Cargo.

'''Once you have the BZ'''

Once you have a canister with over 100 mol of BZ, wrench it down on the gas compressor's input port. Grab an empty O2 tank (scrub one at the air scrubber or print one at the lathe) and put it inside the gas compressor.

Turn the gas compressor on. If you brought enough BZ, the tank will fill until it either starts leaking (in which case you should let it empty itself until around 10 kPa or less and eject the tank) or it explodes (in which case the experiment will instantly conclude).

The tank compressor will output a message when it is done. You must now publish the research paper.